Ontario Z Endorsement Knowledge Exam (Air Brake) -05

1 / 20

What is the colour of the Service Line couplings?

2 / 20

Where are air brake chambers attached?

3 / 20

Air pressure must go from 85 PSI to 100 PSI within 2 minutes, while engine running at ____RPM to ____ RPM.

4 / 20

Tractor protection valve stops the air supply of ______ when closed.

5 / 20

When the air pressure goes on or below _____, low air pressure warning device must activate.

6 / 20

Which brakes do you apply to perform 'Tug Test' on trailer?

7 / 20

When pushrod exceeds the specified limit then brakes must be _____

8 / 20

From where the air compressor takes power?

9 / 20

If pressure drops below ____ PSI, trailer supply valve will automatically close and stop the air supply to the trailer

10 / 20

If the connection port is _______, this will be a short or regular stroke chamber.

11 / 20

If air line has rubbing marks but there is no air leak then

12 / 20

What will you do if Low Air Warning device is activated on the road?

13 / 20

Trailer brake system first supplies air to _______

14 / 20

The air, in the air brake system, first enters into the ______.

15 / 20

The brake pedal should be ______, while measuring the pushrod stroke.

16 / 20

To perform the air brake test, vehicle should be parked at ______ .

17 / 20

If the connection port is _______, you will require a long stroke brake chamber.

18 / 20

How often the air tanks should be drained?

19 / 20

Trailer service brakes can be operated by_____?

20 / 20

While performing pushrod stroke measurement, _______.

Your score is

0%